- Holds eight 36mm drop in filters for un-vignetted imaging at any f/ratio with STF-8300 cameras.
- Thin design – adds only 20mm backfocus (Total backfocus for STF-8300 with FW8-8300 is 38mm).
- Allows the use of an optional Nikon lens adapter with the filter wheel.
- Uses the camera’s I2C port for power and commands. No additional power or computer cable is required.
- Includes 10065 mounting plate with standard T-thread (M42 x 0.75mm) mounting hole to telescope
Compatible with:
- STF-8300M
- STF-1603W (must have W suffix)
- STF-3200W (must have W suffix)
- STF-8050M
- STF-4070M
Supports StarChaser SC-2 autoguider. SC-2 also provides support for the AO-8A adaptive optics accessory.
Need a different connection? Adapters are available for many common sizes of focuser draw tubes – please refer to Adapter Plates.
Additional Information
Power: 12 VDC |
|
Computer Interface: I2C |
|
OS Compatibility: Windows 32 and 64 bit OS, Mac |
|
Weight: 1.35 lbs |
|
Filter Size: 36mm / 1.25" |
36 mm Round Optical Filters | Adapter Plates for Compact Cameras |
User’s Manual
Installation, and operation instructions for the FW8-8300 Filter Wheel.
Backfocus Table
Backfocus configuration table